Alternative Views:
|
 |
 |
 |
 |
This is a complete router tool kit needed for finishing an 80% lower receiver with our Router Jig PRO. Our Patent Pending ReadyMILL™ is packaged with the drill bits necessary for finishing an 80% lower at home. Please note this Router Jig PRO Tool Kit is for the Router Jig PRO only. The Tool Kit for our Original Router Jig can be found here.
This router drill bit kit includes:
- (1) ReadyMILL (Choose size below based on your router model)
- (1) 3/8" Black and Gold High Speed Steel Drill Bit
- (1) 21/64" Black and Gold High Speed Drill Bit
- (1) 5/32" Black and Gold High Speed Drill Bit
Our Patent Pending ReadyMILL™ is the first and only Router-Ready End Mill, which threads directly to your router, eliminating the need for the collet.
You must purchase the correct ReadyMILL™ for your router. Your router's model number can be found on the label.
Sizing Guide:
A Bosch PR10E Bosch PR20EV DeWalt DWE6000 Porter Cable 6430 Porter Cable 6435 Rigid R24012
B Craftsman 28212 DeWalt DWP611* Porter Cable 450
C Makita RT0701C**
D (Requires Full-Size Router Plate - Buy Here) Bosch 1617EV Compatibility may vary due to manufacturing specs Bosch 1617EVS Compatibility may vary due to manufacturing specs Craftsman 2767 Craftsman 27683 Craftsman 50429 DeWalt DW616 DeWalt DW618 Hitachi M12VC
* #1 Recommended Router ** #2 Recommended Router
If you have a router not listed, you can reference the below sizing and thread pitch, and see which would match up with your routers spindle. It can be tricky to get these measurements, and for more information on collecting the info, you can visit:https://www.fastenermart.com/understanding-metric-fasteners.html Spindle Diameter | Tool Size | Thread & Pitch | 0.55” / 13.9 mm | A | M14 x 1 | 0.59” / 15 mm | B | M15 x 1 | 0.66” / 16.8 mm | C | M17 x 1 | 0.78” / 19.9 mm | D | M20 x 1 |
|
|
|
|
 |
 |
 |
 |
|
|