Build-ready bundle that gives you an AR-9 lower plus a FREE Polymer80™ PF940V2 76% bridge frame. Clean, tough, and ready to pair with the right parts so you can get building fast.
Quick overview
-
What you get: AR-9 80% Cerakote lower in FDE plus FREE Polymer80™ G17 PF940V2 76% bridge frame
-
Purpose:
-
Craft a PDW and a full-size Pistol to your specs; a compact, Glock-magazine-fed AR-9 PDW for short-range control and a PF940V2 G17 based pistol that shares magazines and handling traits.
-
PDWs are built for maneuverability, fast transitions, and real-world usability in tight spaces. This bundle gives you the parts foundation to build a matched pair optimized for close quarters, ease of carry, and common-mag logistics.
-
-
Warranty: Lifetime warranty on all our manufactured products
AR-9 80% Lower (FDE):
This CNC machined lower is built from aerospace grade 6061 aluminum and finished in Flat Dark Earth Cerakote for a durable, low-glare build. It accepts Glock-style small-frame pistol caliber magazines (9mm, .40 S&W, .357 SIG, etc.).
Important LRBHO note: our AR-9 lowers are designed to work with upper receivers that support last round bolt hold open (LRBHO). LRBHO keeps the bolt carrier group locked back on an empty magazine. To get proper LRBHO function, buy a compatible upper receiver.
Features
-
CNC machined from aerospace grade 6061 aluminum
-
Threaded bolt catch pin included
-
Accepts mil-spec parts
-
Integrated oversized trigger guard
-
Rounded buffer tube extension
-
Pre-milled rear shelf
-
Flat Dark Earth Cerakote finish
IMPORTANT COMPATIBILITY NOTICE:
These FDE AR9 lowers will work with our PRO JIG. They are NOT compatible with M16 Pocket Jigs. Make sure you have the right jig before purchasing.
Polymer80™ PF940V2 76% Bridge Frame:
A rugged, control-focused 76% frame molded from glass-filled nylon. Ergonomic features and factory-style texture for a secure grip. Compatible with Glock® 17/22 Gen 3 parts.
Frame highlights
-
FREE when bundled with our FDE AR9 Lower
-
Works with Glock® 17/22 Gen3 components
-
Supports 9mm, .40 S&W, or .357 SIG builds
-
Extended beavertail and double undercut trigger guard for better control
-
Flared magwell for faster reloads
-
Glass-filled nylon construction for maximum strength
-
Factory-style texture for secure grip
Notes
-
Jig not included. 5D Tactical does not offer a compatible jig for this product.
-
Rails not included. We highly suggest pairing this frame with our PF940V2 Rail Kit or our Split Front and Rear Rail System.
Split Rail System highlights
-
CNC-machined billet steel construction
-
Three-piece front rail for easier drilling and install
-
Far stronger than MIM or stamped alternatives
-
Designed to fit PF940V2 full-size frames with zero wiggle
-
Patent pending
Restrictions, legal, and policies
Shipping restricted to: California, Colorado, Connecticut, Hawaii, Illinois, Maryland, Nevada, New Jersey, New York, Oregon, Philadelphia, York City, Reading Pennsylvania, Rhode Island, Washington, Washington D.C., Vermont, Massachusetts.
Under California law this product is or contains an unserialized “firearm precursor part” and cannot be sold into the State of California. 5D Tactical cannot accept orders for shipment to California or to California residents.
Excluded from ALL discounts.
Glock® is a trademark of Glock Inc. Some components may be genuine Glock OEM parts; our 80% lowers and select parts are aftermarket solutions not produced or endorsed by Glock Inc. Aftermarket and OEM products are clearly identified to avoid confusion.
Always follow federal, state, and local laws before purchasing. This product is intended for customers who will comply with applicable laws.
Why grab this bundle
You get a tough AR-9 lower that accepts Glock mags plus a FREE PF940V2 76% bridge frame that levels up ergonomics and durability. Lifetime warranty backs the build. Pair with the right upper and our PF940V2 Rail Kit and you’re off to the races.
