Home > Handguard Type > Keymod
Sort By:
Page of 1
10.5" AR-15 Upper Receiver - 1:7 Twist, Parkerized Finish Barrel, M4 Contour, 10" Keymod Rail. C-Shaped End Cut 10.5" AR-15 Pistol Upper - Parkerized M4 Contour Barrel, 1:7 Twist, 10" C-Cut Keymod Rail

10.5" M4 Contour Profile Barrel, 4150 Chrome Moly Vanadium, Parkerized Finish. 10" Lightweight Free Float Keymod Rail with C-Shaped End Cut. These 7075-T6 forged receivers are built in-house by expert builders with over 40 years of experience. Each barrel is visually inspected and cleaned prior to assembly. All barrel nuts are torqued to proper specifications per Mil-Spec standards and practices. Every completed receiver is QC inspected and head space checked before shipment. As completed 10.5-Inch AR-15 upper receiver assemblies are not considered firearms, no FFL is required. Ships directly to your home.

- MADE IN THE USA
- NO BCG or Charging Handle Included - Select Options to Add
- USA Made Barrel
- Barrel Length: 10.5"
- Hand Guard: Free Floating 10" Keymod, C-Shaped End Cut
- Full Length Picatinny Top Rail, No T-Markings
- Caliber: 5.56MM NATO
- Barrel Profile: M4 Contour Profile
- Barrel Type: 4150 Chrome Moly Vanadium - Parkerized Finish
- Gas System: Pistol Length Gas System, .750" diameter Steel Micro Gas Block
- 10.5-Inch AR-15 Upper Receiver: Forged 7075-T6 Flat Top with M4 Feed Ramps
- Forward Assist and Dust Cover Installed
- Muzzle Device: Your Choice A2 Style Birdcage Flash Hider or Compact Muzzle Brake
- 7075-T6 Forged Receiver and Hand Guard are Black Hardcoat Anodized Per MIL-A-8625 Type III Class 2 Specifications

*Buyer is responsible for configuring finished rifle in accordance with state and local laws

Price: $259.99
10.5" AR-15 Upper Receiver - 1:7 Twist, Parkerized Finish Barrel, M4 Contour, 10" Keymod Rail. V-Shaped End Cut 10.5" AR-15 Pistol Upper - Parkerized M4 Contour Barrel, 1:7 Twist, 10" V-Cut Keymod Rail

10.5" M4 Contour Profile Barrel, 4150 Chrome Moly Vanadium, Parkerized Finish. 10" Lightweight Free Float Keymod Rail with V-Shaped End Cut. These AR-15 pistol complete upper receivers are built in-house by expert builders with over 40 years of experience. Each barrel is visually inspected and cleaned prior to assembly. All barrel nuts are torqued to proper specifications per Mil-Spec standards and practices. Every completed receiver is QC inspected and head space checked before shipment. As completed upper receiver assemblies are not considered firearms, no FFL is required. Ships directly to your home.

- MADE IN THE USA
- NO BCG or Charging Handle Included - Select Options to Add
- USA Made Barrel
- Barrel Length: 10.5"
- Hand Guard: Free Floating 10" Keymod, V-Shaped End Cut
- Full Length Picatinny Top Rail, No T-Markings
- Caliber: 5.56MM NATO
- Barrel Profile: M4 Contour Profile
- Barrel Type: 4150 Chrome Moly Vanadium - Parkerized Finish
- Gas System: Pistol Length Gas System, .750" diameter Steel Micro Gas Block
- AR-15 Pistol Complete Upper Receiver: Forged 7075-T6 Flat Top with M4 Feed Ramps
- Forward Assist and Dust Cover Installed
- Muzzle Device: Your Choice A2 Style Birdcage Flash Hider or Compact Muzzle Brake
- Complete 10.5" Upper Receiver and Hand Guard are Black Hardcoat Anodized Per MIL-A-8625 Type III Class 2 Specifications

*Buyer is responsible for configuring finished rifle in accordance with state and local laws

Price: $259.99
10.5" 300 Blackout AR-15 Upper Receiver - 1:7 Twist, Parkerized Finish Barrel, 10" Keymod Rail. C-Shaped End Cut 10.5" AR-15 Pistol Upper - 300 Blackout, Parkerized Barrel, 1:7 Twist, 10" C-Cut Keymod Rail

10.5" M4 Contour Profile Barrel, 4150 Chrome Moly Vanadium, Parkerized Finish. 10" Lightweight Free Float Keymod Rail with C-Shaped End Cut. This AR-15 pistol upper is built in-house by expert builders with over 40 years of experience. Each barrel is visually inspected and cleaned prior to assembly. All barrel nuts are torqued to proper specifications per Mil-Spec standards and practices. Every completed receiver is QC inspected and head space checked before shipment. As completed AR-15 1:7 twist upper receiver assemblies are not considered firearms, no FFL is required. Ships directly to your home.

- MADE IN THE USA
- NO BCG or Charging Handle Included - Select Options to Add
- USA Made Barrel
- Barrel Length: 10.5"
- Hand Guard: Free Floating 10" Keymod, C-Shaped End Cut
- Full Length Picatinny Top Rail, No T-Markings
- Caliber: 300 Blackout
- Barrel Profile: M4 Contour Profile
- Barrel Type: 4150 Chrome Moly Vanadium - Parkerized Finish
- Gas System: Pistol Length Gas System, .750" diameter Steel Micro Gas Block
- AR-15 1:7 Twist Upper Receiver: Forged 7075-T6 Flat Top with M4 Feed Ramps
- Forward Assist and Dust Cover Installed
- Muzzle Device: Your Choice A2 Style Birdcage Flash Hider or Compact Muzzle Brake
- AR-15 pistol upper and Hand Guard are Black Hardcoat Anodized Per MIL-A-8625 Type III Class 2 Specifications

*Buyer is responsible for configuring finished rifle in accordance with state and local laws

Price: $274.99
10.5" 300 Blackout AR-15 Upper Receiver - 1:7 Twist, Parkerized Finish Barrel, 10" Keymod Rail. V-Shaped End Cut 10.5" AR-15 Pistol Upper - 300 Blackout, Parkerized Barrel, 1:7 Twist, 10" V-Cut Keymod Rail

10.5" M4 Contour Profile Barrel, 4150 Chrome Moly Vanadium, Parkerized Finish. 10" Lightweight Free Float Keymod Rail with V-Shaped End Cut. These AR-15 300 Blackout complete upper receivers are built in-house by expert builders with over 40 years of experience. Each barrel is visually inspected and cleaned prior to assembly. All barrel nuts are torqued to proper specifications per Mil-Spec standards and practices. Every completed receiver is QC inspected and head space checked before shipment. As completed upper receiver assemblies are not considered firearms, no FFL is required. Ships directly to your home.

- MADE IN THE USA
- NO BCG or Charging Handle Included - Select Options to Add
- USA Made Barrel
- Barrel Length: 10.5"
- Hand Guard: Free Floating 10" Keymod, V-Shaped End Cut
- Full Length Picatinny Top Rail, No T-Markings
- Caliber: 300 Blackout
- Barrel Profile: M4 Contour Profile
- Barrel Type: 4150 Chrome Moly Vanadium - Parkerized Finish
- Gas System: Pistol Length Gas System, .750" diameter Steel Micro Gas Block
- Upper Receiver: Forged 7075-T6 Flat Top with M4 Feed Ramps
- Forward Assist and Dust Cover Installed
- Muzzle Device: Your Choice A2 Style Birdcage Flash Hider or Compact Muzzle Brake
- 10.5-Inch AR-15 Pistol Upper Receiver and Hand Guard are Black Hardcoat Anodized Per MIL-A-8625 Type III Class 2 Specifications

*Buyer is responsible for configuring finished rifle in accordance with state and local laws

Price: $274.99
16" AR-15 7.62x39 Upper Receiver - 1:10 Twist, Parkerized Heavy Barrel, 10" V-Cut Keymod 16" AR-15 7.62x39 Upper - Parkerized Heavy Barrel, 1:10 Twist, 10" V-Cut Keymod Rail

16" Heavy Barrel, 4150 Chrome Moly Vanadium, 1:10 Twist. 10" V-Cut Keymod handguard. This free-float handguard is an excellent lightweight option for use with flip sights or optics.

A quality and budget friendly AR-15 complete upper for sale brought to you by 5D Tactical. These upper receivers are built in-house by expert builders with over 40 years of experience. Each barrel is visually inspected and cleaned prior to assembly. All barrel nuts are torqued to proper specifications per Mil-Spec standards and practices. Every AR-15 complete upper for sale is QC inspected and head space checked before shipment. As completed upper receiver assemblies are not considered firearms, no FFL is required. Ships directly to your home.

- MADE IN THE USA
- NO BCG or Charging Handle Included - Select Options to Add
- USA Made Barrel
- Barrel Length: 16"
- Twist Rate: 1:10
- Hand Guard: 10" V-Cut Keymod Free-Float Handguard
- Caliber: 7.62x39mm
- Barrel Profile: Heavy Barrel
- Barrel Type: 4150 Chrome Moly Vanadium - Parkerized Finish
- Gas System: Carbine Length Gas System, .750" diameter Steel Micro Gas Block
- Upper Receiver: Forged 7075-T6 Flat Top with M4 Feed Ramps
- Forward Assist and Dust Cover Installed
- Muzzle Device: Your Choice A2 Style Birdcage Flash Hider or Compact Muzzle Brake
- Upper Receiver is Black Hardcoat Anodized Per MIL-A-8625 Type III Class 2 Specifications

*Buyer is responsible for configuring finished rifle in accordance with state and local laws

Price: $309.99
Sale Price: $289.99
You Save: $20.00
16" AR-15 7.62x39 Upper Receiver - 1:10 Twist, Parkerized Heavy Barrel, 10" C-Cut Keymod 16" AR-15 7.62x39 Upper - Parkerized Heavy Barrel, 1:10 Twist, 10" C-Cut Keymod Rail

16" Heavy Barrel, 4150 Chrome Moly Vanadium, 1:10 Twist. 10" C-Cut Keymod handguard. This free-float handguard is an excellent lightweight option for use with flip sights or optics.

A quality and budget friendly AR-15 complete upper for sale brought to you by 5D Tactical. These upper receivers are built in-house by expert builders with over 40 years of experience. Each barrel is visually inspected and cleaned prior to assembly. All barrel nuts are torqued to proper specifications per Mil-Spec standards and practices. Every AR-15 complete upper for sale is QC inspected and head space checked before shipment. As completed upper receiver assemblies are not considered firearms, no FFL is required. Ships directly to your home.

- MADE IN THE USA
- NO BCG or Charging Handle Included - Select Options to Add
- USA Made Barrel
- Barrel Length: 16"
- Twist Rate: 1:10
- Hand Guard: 10" C-Cut Keymod Free-Float Handguard
- Caliber: 7.62x39mm
- Barrel Profile: Heavy Barrel
- Barrel Type: 4150 Chrome Moly Vanadium - Parkerized Finish
- Gas System: Carbine Length Gas System, .750" diameter Steel Micro Gas Block
- Upper Receiver: Forged 7075-T6 Flat Top with M4 Feed Ramps
- Forward Assist and Dust Cover Installed
- Muzzle Device: Your Choice A2 Style Birdcage Flash Hider or Compact Muzzle Brake
- Upper Receiver is Black Hardcoat Anodized Per MIL-A-8625 Type III Class 2 Specifications

*Buyer is responsible for configuring finished rifle in accordance with state and local laws

Price: $309.99
Sale Price: $289.99
You Save: $20.00
16" AR-15 7.62x39 Upper Receiver - 1:10 Twist, Parkerized Heavy Barrel, 12" C-Cut Keymod 16" AR-15 7.62x39 Upper - Parkerized Heavy Barrel, 1:10 Twist, 12" C-Cut Keymod Rail

16" Heavy Barrel, 4150 Chrome Moly Vanadium, 1:10 Twist. 12" C-Cut Keymod handguard. This free-float handguard is an excellent lightweight option for use with flip sights or optics.

A quality and budget friendly AR-15 complete upper for sale brought to you by 5D Tactical. These upper receivers are built in-house by expert builders with over 40 years of experience. Each barrel is visually inspected and cleaned prior to assembly. All barrel nuts are torqued to proper specifications per Mil-Spec standards and practices. Every AR-15 complete upper for sale is QC inspected and head space checked before shipment. As completed upper receiver assemblies are not considered firearms, no FFL is required. Ships directly to your home.

- MADE IN THE USA
- NO BCG or Charging Handle Included - Select Options to Add
- USA Made Barrel
- Barrel Length: 16"
- Twist Rate: 1:10
- Hand Guard: 12" C-Cut Keymod Free-Float Handguard
- Caliber: 7.62x39mm
- Barrel Profile: Heavy Barrel
- Barrel Type: 4150 Chrome Moly Vanadium - Parkerized Finish
- Gas System: Carbine Length Gas System, .750" diameter Steel Micro Gas Block
- Upper Receiver: Forged 7075-T6 Flat Top with M4 Feed Ramps
- Forward Assist and Dust Cover Installed
- Muzzle Device: Your Choice A2 Style Birdcage Flash Hider or Compact Muzzle Brake
- Upper Receiver is Black Hardcoat Anodized Per MIL-A-8625 Type III Class 2 Specifications

*Buyer is responsible for configuring finished rifle in accordance with state and local laws

Price: $314.99
Sale Price: $294.99
You Save: $20.00
16" AR-15 7.62x39 Upper Receiver - 1:10 Twist, Parkerized Heavy Barrel, 12" V-Cut Keymod 16" AR-15 7.62x39 Upper - Parkerized Heavy Barrel, 1:10 Twist, 12" V-Cut Keymod Rail

16" Heavy Barrel, 4150 Chrome Moly Vanadium, 1:10 Twist. 12" V-Cut Keymod handguard. This free-float handguard is an excellent lightweight option for use with flip sights or optics.

A quality and budget friendly AR-15 complete upper for sale brought to you by 5D Tactical. These upper receivers are built in-house by expert builders with over 40 years of experience. Each barrel is visually inspected and cleaned prior to assembly. All barrel nuts are torqued to proper specifications per Mil-Spec standards and practices. Every AR-15 complete upper for sale is QC inspected and head space checked before shipment. As completed upper receiver assemblies are not considered firearms, no FFL is required. Ships directly to your home.

- MADE IN THE USA
- NO BCG or Charging Handle Included - Select Options to Add
- USA Made Barrel
- Barrel Length: 16"
- Twist Rate: 1:10
- Hand Guard: 12" V-Cut Keymod Free-Float Handguard
- Caliber: 7.62x39mm
- Barrel Profile: Heavy Barrel
- Barrel Type: 4150 Chrome Moly Vanadium - Parkerized Finish
- Gas System: Carbine Length Gas System, .750" diameter Steel Micro Gas Block
- Upper Receiver: Forged 7075-T6 Flat Top with M4 Feed Ramps
- Forward Assist and Dust Cover Installed
- Muzzle Device: Your Choice A2 Style Birdcage Flash Hider or Compact Muzzle Brake
- Upper Receiver is Black Hardcoat Anodized Per MIL-A-8625 Type III Class 2 Specifications

*Buyer is responsible for configuring finished rifle in accordance with state and local laws

Price: $314.99
Sale Price: $294.99
You Save: $20.00
16" AR-15 7.62x39 Upper Receiver - 1:10 Twist, Parkerized Heavy Barrel, 15" V-Cut Keymod 16" AR-15 7.62x39 Upper - Parkerized Heavy Barrel, 1:10 Twist, 15" V-Cut Keymod Rail

16" Heavy Barrel, 4150 Chrome Moly Vanadium, 1:10 Twist. 15" V-Cut Keymod handguard. This full-length handguard offers looks and complete performance for any rail-attachment accessories or optics.

A quality and budget friendly AR-15 complete upper for sale brought to you by 5D Tactical. These upper receivers are built in-house by expert builders with over 40 years of experience. Each barrel is visually inspected and cleaned prior to assembly. All barrel nuts are torqued to proper specifications per Mil-Spec standards and practices. Every AR-15 complete upper for sale is QC inspected and head space checked before shipment. As completed upper receiver assemblies are not considered firearms, no FFL is required. Ships directly to your home.

- MADE IN THE USA
- NO BCG or Charging Handle Included - Select Options to Add
- USA Made Barrel
- Barrel Length: 16"
- Twist Rate: 1:10
- Hand Guard: 15" V-Cut Keymod Free-Float Handguard
- Caliber: 7.62x39mm
- Barrel Profile: Heavy Barrel
- Barrel Type: 4150 Chrome Moly Vanadium - Parkerized Finish
- Gas System: Carbine Length Gas System, .750" diameter Steel Micro Gas Block
- Upper Receiver: Forged 7075-T6 Flat Top with M4 Feed Ramps
- Forward Assist and Dust Cover Installed
- Muzzle Device: Your Choice A2 Style Birdcage Flash Hider or Compact Muzzle Brake
- Upper Receiver is Black Hardcoat Anodized Per MIL-A-8625 Type III Class 2 Specifications

*Buyer is responsible for configuring finished rifle in accordance with state and local laws

Price: $324.99
Sale Price: $304.99
You Save: $20.00
16" AR-15 7.62x39 Upper Receiver - 1:10 Twist, Parkerized Heavy Barrel, 15" C-Cut Keymod 16" AR-15 7.62x39 Upper - Parkerized Heavy Barrel, 1:10 Twist, 15" C-Cut Keymod Rail

16" Heavy Barrel, 4150 Chrome Moly Vanadium, 1:10 Twist. 15" C-Cut Keymod handguard. This full-length handguard offers looks and complete performance for any rail-attachment accessories or optics.

A quality and budget friendly AR-15 complete upper for sale brought to you by 5D Tactical. These upper receivers are built in-house by expert builders with over 40 years of experience. Each barrel is visually inspected and cleaned prior to assembly. All barrel nuts are torqued to proper specifications per Mil-Spec standards and practices. Every AR-15 complete upper for sale is QC inspected and head space checked before shipment. As completed upper receiver assemblies are not considered firearms, no FFL is required. Ships directly to your home.

- MADE IN THE USA
- NO BCG or Charging Handle Included - Select Options to Add
- USA Made Barrel
- Barrel Length: 16"
- Twist Rate: 1:10
- Hand Guard: 15" C-Cut Keymod Free-Float Handguard
- Caliber: 7.62x39mm
- Barrel Profile: Heavy Barrel
- Barrel Type: 4150 Chrome Moly Vanadium - Parkerized Finish
- Gas System: Carbine Length Gas System, .750" diameter Steel Micro Gas Block
- Upper Receiver: Forged 7075-T6 Flat Top with M4 Feed Ramps
- Forward Assist and Dust Cover Installed
- Muzzle Device: Your Choice A2 Style Birdcage Flash Hider or Compact Muzzle Brake
- Upper Receiver is Black Hardcoat Anodized Per MIL-A-8625 Type III Class 2 Specifications

*Buyer is responsible for configuring finished rifle in accordance with state and local laws

Price: $324.99
Sale Price: $304.99
You Save: $20.00
16" AR-15 Upper Receiver - 1:8 Twist, Parkerized Finish Barrel, M4 Contour, 10" Keymod Rail. C-Shaped End Cut 16" AR-15 Upper - Parkerized M4 Contour Barrel, 1:8 Twist, 10" C-Cut Keymod Rail

16" M4 Contour Profile Barrel, 4150 Chrome Moly Vanadium, Parkerized Finish. 10" Lightweight Free Float Keymod Rail with C-Shaped End Cut. These AR-15 Complete Upper Assembly built in-house by expert builders with over 40 years of experience. Each barrel is visually inspected and cleaned prior to assembly. All barrel nuts are torqued to proper specifications per Mil-Spec standards and practices. Every completed receiver is QC inspected and head space checked before shipment. As completed 16-inch upper receiver assemblies are not considered firearms, no FFL is required. Ships directly to your home.

- MADE IN THE USA
- NO BCG or Charging Handle Included - Select Options to Add
- USA Made Barrel
- Barrel Length: 16"
- Hand Guard: Free Floating 10" Keymod, C-Shaped End Cut
- Full Length Picatinny Top Rail, No T-Markings
- Caliber: Your Choice 5.56MM NATO or .223 Wylde
- Barrel Profile: M4 Contour Profile
- Barrel Type: 4150 Chrome Moly Vanadium - Parkerized Finish
- Gas System: Carbine Length Gas System, .750" diameter Steel Micro Gas Block
- 16-Inch Upper Receiver: Forged 7075-T6 Flat Top with M4 Feed Ramps
- Forward Assist and Dust Cover Installed
- Muzzle Device: Your Choice A2 Style Birdcage Flash Hider or Compact Muzzle Brake
- AR-15 Complete Upper Assembly and Hand Guard are Black Hardcoat Anodized Per MIL-A-8625 Type III Class 2 Specifications

*Buyer is responsible for configuring finished rifle in accordance with state and local laws

Price: $309.99
16" AR-15 Upper Receiver - 1:8 Twist, Parkerized Finish, M4 Contour Barrel, 10" Keymod Rail with V- Shaped End Cut 16" AR-15 Upper - Parkerized M4 Contour Barrel, 1:8 Twist, 10" V-Cut Keymod Rail

Contoured 16-Inch M4 Barrel, 4150 Chrome Moly Vanadium, Parkerized Finish. 10" Lightweight Free Float Keymod Rail with V-Shaped End Cut. This AR-15 complete flat top upper receiver is built in-house by expert builders with over 40 years of experience. Each barrel is visually inspected and cleaned prior to assembly. All barrel nuts are torqued to proper specifications per Mil-Spec standards and practices. Every completed receiver is QC inspected and head space checked before shipment. As completed upper receiver assemblies are not considered firearms, no FFL is required. Ships directly to your home.

- MADE IN THE USA
- NO BCG or Charging Handle Included - Select Option to Add
- USA Made 16-Inch M4 Barrel
- Barrel Length: 16"
- Hand Guard: Free Floating 10" Keymod
- Full Length Picatinny Top Rail
- Caliber: Your Choice 5.56MM NATO or .223 Wylde
- Barrel Profile: M4 Contour Profile
- Barrel Type: 4150 Chrome Moly Vanadium - Parkerized Finish
- Gas System: Carbine Length Gas System, .750" diameter Steel Micro Gas Block
- Upper Receiver: Forged 7075-T6 Flat Top with M4 Feed Ramps
- Forward Assist and Dust Cover Installed
- Muzzle Device: Your Choice A2 Style Birdcage Flash Hider or Compact Muzzle Brake
- AR-15 Complete Flat Top Upper Receiver and Hand Guard are Black Hardcoat Anodized Per MIL-A-8625 Type III Class 2 Specifications

*Buyer is responsible for configuring finished rifle in accordance with state and local laws

Price: $309.99
16" AR-15 Upper Receiver - 1:8 Twist, Parkerized Finish Barrel, M4 Contour, 12" Keymod Rail. C-Shaped End Cut 16" AR-15 Upper - Parkerized M4 Contour Barrel, 1:8 Twist, 12" C-Cut Keymod Rail

16" M4 Contour Profile Barrel, 4150 Chrome Moly Vanadium, Parkerized Finish. 12" Lightweight Free Float Keymod Upper Assembly with C-Shaped End Cut. These upper receivers are built in-house by expert builders with over 40 years of experience. Each barrel is visually inspected and cleaned prior to assembly. All barrel nuts are torqued to proper specifications per Mil-Spec standards and practices. Every completed receiver is QC inspected and head space checked before shipment. As completed upper receiver assemblies are not considered firearms, no FFL is required. Ships directly to your home.

- MADE IN THE USA
- NO BCG or Charging Handle Included - Select Options to Add
- USA Made Barrel
- Barrel Length: 16"
- Hand Guard: Free Floating 12" Keymod, C-Shaped End Cut
- Full Length Picatinny Top Rail, No T-Markings
- Caliber: Your Choice 5.56MM NATO or .223 Wylde
- Barrel Profile: M4 Contour Profile
- Barrel Type: 4150 Chrome Moly Vanadium - Parkerized Finish
- Gas System: Carbine Length Gas System, .750" diameter Steel Micro Gas Block
- Upper Receiver: Forged 7075-T6 Flat Top with M4 Feed Ramps
- Forward Assist and Dust Cover Installed
- Muzzle Device: Your Choice A2 Style Birdcage Flash Hider or Compact Muzzle Brake
- AR-15 Barreled Upper Receiver and Hand Guard are Black Hardcoat Anodized Per MIL-A-8625 Type III Class 2 Specifications

*Buyer is responsible for configuring finished rifle in accordance with state and local laws

Price: $314.99
16" AR-15 Upper Receiver - 1:8 Twist, Parkerized Finish Barrel, M4 Contour, 12" Keymod Rail. V-Shaped End Cut 16" AR-15 Upper - Parkerized M4 Contour Barrel, 1:8 Twist, 12" V-Cut Keymod Rail

16" M4 Contour Profile Barrel, 4150 Chrome Moly Vanadium, Parkerized Finish. 12-Inch Free Float Keymod Rail with V-Shaped End Cut. These upper receivers are built in-house by expert builders with over 40 years of experience. Each barrel is visually inspected and cleaned prior to assembly. All barrel nuts are torqued to proper specifications per Mil-Spec standards and practices. Every complete AR-15 upper receiver is QC inspected and head space checked before shipment. As completed upper receiver assemblies are not considered firearms, no FFL is required. Ships directly to your home.

- MADE IN THE USA
- NO BCG or Charging Handle Included - Select Options to Add
- USA Made Barrel
- Barrel Length: 16"
- Hand Guard: Free Floating 12" Keymod, V-Shaped End Cut
- Full Length Picatinny Top Rail, No T-Markings
- Caliber: Your Choice 5.56MM NATO or .223 Wylde
- Barrel Profile: M4 Contour Profile
- Barrel Type: 4150 Chrome Moly Vanadium - Parkerized Finish
- Gas System: Carbine Length Gas System, .750" diameter Steel Micro Gas Block
- Upper Receiver: Forged 7075-T6 Flat Top with M4 Feed Ramps
- Forward Assist and Dust Cover Installed
- Muzzle Device: Your Choice A2 Style Birdcage Flash Hider or Compact Muzzle Brake
- Upper Receiver and Hand Guard are Black Hardcoat Anodized Per MIL-A-8625 Type III Class 2 Specifications

*Buyer is responsible for configuring finished rifle in accordance with state and local laws

Price: $314.99
16" AR-15 Upper Receiver - 1:8 Twist, Stainless Steel Barrel, M4 Contour, 10" Keymod Rail with C-Shaped End Cut 16" AR-15 Upper - Stainless M4 Contour Barrel, 1:8 Twist, 10" C-Cut Keymod Rail

16" M4 Contour Profile Barrel, 416R Stainless Steel. 10" Lightweight Free Float Keymod Rail with C-Shaped end cut. These AR-15 barrel and upper receivers are built in-house by expert builders with over 40 years of experience. Each barrel is visually inspected and cleaned prior to assembly. All barrel nuts are torqued to proper specifications per Mil-Spec standards and practices. Every completed receiver is QC inspected and head space checked before shipment. As M4 complete upper receiver assemblies are not considered firearms, no FFL is required. Ships directly to your home.


- MADE IN THE USA
- NO BCG or Charging Handle Included - Select Options to Add
- USA Made Barrel
- Barrel Length: 16"
- Hand Guard: Free Floating 10" Keymod with C-Shaped End Cut
- Full Length Picatinny Top Rail - No T-Markings
- Caliber: Your Choice 5.56MM NATO or .223 Wylde
- Barrel Profile: M4 Contour Profile
- Barrel Type: 416R Stainless Steel
- Gas System: Carbine Length Gas System, .750" diameter Steel Micro Gas Block
- AR-15 Barrel and Upper Receiver: Forged 7075-T6 Flat Top with M4 Feed Ramps
- Forward Assist and Dust Cover Installed
- Muzzle Device: Your Choice A2 Style Birdcage Flash Hider or Compact Muzzle Brake
- M4 Complete Upper Receiver and Hand Guard are Black Hardcoat Anodized Per MIL-A-8625 Type III Class 2 Specifications

*Buyer is responsible for configuring finished rifle in accordance with state and local laws

Price: $324.99
16" AR-15 Upper Receiver - 1:8 Twist, Stainless Steel M4 Contour Barrel, 10" Keymod Rail with V-Shaped End Cut 16" AR-15 Upper - Stainless M4 Contour Barrel, 1:8 Twist, 10" V-Cut Keymod Rail

16" M4 Contour Profile Barrel, 416R Stainless Steel. 10" Lightweight Keymod Free Float Rail with V-Shaped End Cut. This 16-Inch AR-15 Upper is built in-house by expert builders with over 40 years of experience. Each barrel is visually inspected and cleaned prior to assembly. All barrel nuts are torqued to proper specifications per Mil-Spec standards and practices. Every completed receiver is QC inspected and head space checked before shipment. As completed upper receiver assemblies are not considered firearms, no FFL is required. Ships directly to your home.

- MADE IN THE USA
- NO BCG or Charging Handle Included - Select Options to Add
- USA Made Barrel
- Barrel Length: 16"
- Hand Guard: Free Floating 10" Keymod
- Full Length Picatinny Top Keymod Free Float Rail
- Caliber: Your Choice 5.56MM NATO or .223 Wylde
- Barrel Profile: M4 Contour Profile
- Barrel Type: 416R Stainless Steel
- Gas System: Carbine Length Gas System, .750" diameter Steel Micro Gas Block
- Upper Receiver: Forged 7075-T6 Flat Top with M4 Feed Ramps
- Forward Assist and Dust Cover Installed
- Muzzle Device: Your Choice A2 Style Birdcage Flash Hider or Compact Muzzle Brake
- 16-Inch AR-15 Upper Receiver and Hand Guard are Black Hardcoat Anodized Per MIL-A-8625 Type III Class 2 Specifications

*Buyer is responsible for configuring finished rifle in accordance with state and local laws

Price: $324.99
16" AR-15 Upper Receiver - 300 AAC Blackout Barrel, 1:8 Twist, Parkerized Finish, SOCOM Profile, 10" Keymod Rail with C-Shaped End Cut 16" AR-15 Upper - 300 Blackout, Parkerized Barrel, 1:8 Twist, 10" C-Cut Keymod Rail

16" SOCOM Profile Barrel, 300 AAC Blackout Upper, 4150 Chrome Moly Vanadium, Parkerized Finish. 10" Lightweight Free Float Keymod Rail with C-Shaped End Cut. These upper receivers are built in-house by expert builders with over 40 years of experience. Each barrel is visually inspected and cleaned prior to assembly. All barrel nuts are torqued to proper specifications per Mil-Spec standards and practices. Every completed receiver is QC inspected and head space checked before shipment. As completed upper receiver assemblies are not considered firearms, no FFL is required. Ships directly to your home.

- MADE IN THE USA
- NO BCG or Charging Handle Included - Select Options to Add
- USA Made Barrel
- Barrel Length: 16"
- Hand Guard: Free Floating 10" Keymod with C-Shaped End Cut
- Full Length Picatinny Top Rail
- Caliber: 300 AAC Blackout
- Barrel Profile: SOCOM Profile
- Barrel Type: 4150 Chrome Moly Vanadium - Parkerized Finish
- Gas System: Carbine Length Gas System, .750" diameter Steel Micro Gas Block
- 300 AAC Blackout Upper Receiver: Forged 7075-T6 Flat Top with M4 Feed Ramps
- Forward Assist and Dust Cover Installed
- Muzzle Device: Your Choice A2 Style Birdcage Flash Hider or Compact Muzzle Brake
- AR-15 Full Upper Receiver Kit and Hand Guard are Black Hardcoat Anodized Per MIL-A-8625 Type III Class 2 Specifications

*Buyer is responsible for configuring finished rifle in accordance with state and local laws

Price: $324.99
16" AR-15 Upper Receiver - 300 AAC Blackout Barrel, 1:8 Twist, Parkerized Finish, SOCOM, 10" Keymod Rail with V-Shaped End Cut 16" AR-15 Upper - 300 Blackout, Parkerized Barrel, 1:8 Twist, 10" V-Cut Keymod Rail

16" SOCOM Profile Barrel, 300 AAC Blackout, 4150 Chrome Moly Vanadium, Parkerized Finish. 10" Lightweight Free Float Keymod Rail with V-Shaped End Cut. These AR-15 Mil-Spec complete upper receivers are built in-house by expert builders with over 40 years of experience. Each barrel is visually inspected and cleaned prior to assembly. All barrel nuts are torqued to proper specifications per Mil-Spec standards and practices. Every completed receiver is QC inspected and head space checked before shipment. As completed upper receiver assemblies are not considered firearms, no FFL is required. Ships directly to your home.

- MADE IN THE USA
- NO BCG or Charging Handle Included - Select Options to Add
- USA Made Barrel
- Barrel Length: 16"
- Hand Guard: Free Floating 10" Keymod with V-Shaped End Cut
- Full Length Picatinny Top Rail
- Caliber: 300 Blackout AR Upper
- Barrel Profile: SOCOM Profile
- Barrel Type: 4150 Chrome Moly Vanadium - Parkerized Finish
- Gas System: Carbine Length Gas System, .750" diameter Steel Micro Gas Block
- Upper Receiver: Forged 7075-T6 Flat Top with M4 Feed Ramps
- Forward Assist and Dust Cover Installed
- Muzzle Device: Your Choice A2 Style Birdcage Flash Hider or Compact Muzzle Brake
- AR-15 Mil-Spec Complete Upper Receiver and Hand Guard are Black Hardcoat Anodized Per MIL-A-8625 Type III Class 2 Specifications

*Buyer is responsible for configuring finished rifle in accordance with state and local laws

Price: $324.99
16" AR-15 Upper Receiver - 1:8 Twist, Parkerized Finish M4 Contour Barrel, 15" Keymod Rail with V-Shaped End Cut 16" AR-15 Upper - Parkerized M4 Contour Barrel, 1:8 Twist, 15" V-Cut Keymod Rail

AR-15 Upper with M4 Profile Barrel, Your Choice of NATO 5.56 Upper Receiver or .223 Wylde, 4150 Chrome Moly Vanadium, Parkerized Finish. 15" Keymod Rail with V-Shaped End Cut. These upper receivers are built in-house by expert builders with over 40 years of experience. Each barrel is visually inspected and cleaned prior to assembly. All barrel nuts are torqued to proper specifications per Mil-Spec standards and practices. Every completed receiver is QC inspected and head space checked before shipment. As completed upper receiver assemblies are not considered firearms, no FFL is required. Ships directly to your home.

- MADE IN THE USA
- NO BCG or Charging Handle Included - Select Options to Add
- USA Made Barrel
- Barrel Length: 16"
- Hand Guard: Free Floating 15" Keymod with V-Shaped End Cut
- Full Length Picatinny Top Rail - No T-Markings
- Caliber: Your Choice 5.56MM NATO or .223 Wylde
- Barrel Profile: M4 Contour Profile
- Barrel Type: 4150 Chrome Moly Vanadium - Parkerized Finish
- Gas System: Carbine Length Gas System, .750" diameter Steel Micro Gas Block
- AR-15 Upper with M4 Profile Barrel: Forged 7075-T6 Flat Top with M4 Feed Ramps
- Forward Assist and Dust Cover Installed
- Muzzle Device: Your Choice A2 Style Birdcage Flash Hider or Compact Muzzle Brake
- .223/5.56 Upper Receiver and Hand Guard are Black Hardcoat Anodized Per MIL-A-8625 Type III Class 2 Specifications

*Buyer is responsible for configuring finished rifle in accordance with state and local laws

Price: $324.99
16" AR-15 Upper Receiver - 1:8 Twist, Parkerized Finish Barrel, M4 Contour, 15" Keymod C-Cut Rail 16" AR-15 Upper - Parkerized M4 Contour Barrel, 1:8 Twist, 15" C-Cut Keymod Rail

16" M4 Contour Profile Barrel, Your Choice 5.56mm NATO or .223 Wylde, 4150 Chrome Moly Vanadium, Parkerized Finish. 15" Free Float Keymod Rail with C-Shaped End Cut. These upper receivers are built in-house by expert builders with over 40 years of experience. Each barrel is visually inspected and cleaned prior to assembly. All barrel nuts are torqued to proper specifications per Mil-Spec standards and practices. Every completed receiver is QC inspected and head space checked before shipment. As completed AR-15 16-inch upper assemblies are not considered firearms, no FFL is required. Ships directly to your home.

- MADE IN THE USA
- NO BCG or Charging Handle Included - Select Options to Add
- USA Made AR-15 1:8 Twist Barrel
- Barrel Length: 16"
- Hand Guard: Free Floating 15" Keymod with C-Shaped End Cut
- Full Length Picatinny Top Rail
- Caliber: Your Choice 5.56mm NATO or .223 Wylde
- Barrel Profile: M4 Contour Profile
- Barrel Type: 4150 Chrome Moly Vanadium - Parkerized Finish
- Gas System: Carbine Length Gas System, .750" diameter Steel Micro Gas Block
- Upper Receiver: Forged 7075-T6 Flat Top with M4 Feed Ramps
- Forward Assist and Dust Cover Installed
- Muzzle Device: Your Choice A2 Style Birdcage Flash Hider or Compact Muzzle Brake
- Upper Receiver and Hand Guard are Black Hardcoat Anodized Per MIL-A-8625 Type III Class 2 Specifications

*Buyer is responsible for configuring finished rifle in accordance with state and local laws

Price: $324.99
16" AR-15 Upper Receiver - 1:8 Twist, Stainless Steel Barrel, M4 Contour, 12" Keymod Rail with C-Shaped End Cut 16" AR-15 Upper - Stainless M4 Contour Barrel, 1:8 Twist, 12" C-Cut Keymod Rail

16" M4 Contour Profile Barrel, 416R Stainless Steel. 12" Lightweight Free Float Keymod Rail with C-Shaped end cut. These upper receivers are built in-house by expert builders with over 40 years of experience. Each AR-15 stainless steel barrel is visually inspected and cleaned prior to assembly. All 16-inch M4 profile barrel nuts are torqued to proper specifications per Mil-Spec standards and practices. Every completed receiver is QC inspected and head space checked before shipment. As completed upper receiver assemblies are not considered firearms, no FFL is required. Ships directly to your home.


- MADE IN THE USA
- NO BCG or Charging Handle Included - Select Options to Add
- USA Made Barrel
- Barrel Length: 16"
- Hand Guard: Free Floating 12" Keymod with C-Shaped End Cut
- Full Length Picatinny Top Rail - No T-Markings
- Caliber: Your Choice 5.56MM NATO or .223 Wylde
- Barrel Profile: M4 Contour Profile
- Barrel Type: 416R Stainless Steel
- Gas System: Carbine Length Gas System, .750" diameter Steel Micro Gas Block
- Upper Receiver: Forged 7075-T6 Flat Top with M4 Feed Ramps
- Forward Assist and Dust Cover Installed
- Muzzle Device: Your Choice A2 Style Birdcage Flash Hider or Compact Muzzle Brake
- Upper Receiver and Hand Guard are Black Hardcoat Anodized Per MIL-A-8625 Type III Class 2 Specifications

*Buyer is responsible for configuring finished rifle in accordance with state and local laws

Price: $329.99
16" AR-15 Upper Receiver - 1:8 Twist, Stainless Steel Barrel, M4 Contour, 12" Keymod Rail with V-Shaped End Cut 16" AR-15 Upper - Stainless M4 Contour Barrel, 1:8 Twist, 12" V-Cut Keymod Rail

16" M4 Contour Profile Barrel, 416R Stainless Steel. Lightweight 12-Inch Keymod Rail with V-Shaped end cut. This AR-15 upper receiver assembly is built in-house by expert builders with over 40 years of experience. Each barrel is visually inspected and cleaned prior to assembly. All barrel nuts are torqued to proper specifications per Mil-Spec standards and practices. Every completed receiver is QC inspected and head space checked before shipment. As this complete AR-15 upper receiver assembly is not considered a firearm, no FFL is required. Ships directly to your home.


- MADE IN THE USA
- NO BCG or Charging Handle Included - Select Options to Add
- USA Made Barrel
- Barrel Length: 16"
- Hand Guard: Free Floating 12-Inch Keymod Rail with V-Shaped End Cut
- Full Length Picatinny Top Rail - No T-Markings
- Caliber: Your Choice 5.56MM NATO or .223 Wylde
- Barrel Profile: M4 Contour Profile
- Barrel Type: 416R Stainless Steel
- Gas System: Carbine Length Gas System, .750" diameter Steel Micro Gas Block
- Upper Receiver: Forged 7075-T6 Flat Top with M4 Feed Ramps
- Forward Assist and Dust Cover Installed
- Muzzle Device: Your Choice A2 Style Birdcage Flash Hider or Compact Muzzle Brake
- Upper Receiver and Hand Guard are Black Hardcoat Anodized Per MIL-A-8625 Type III Class 2 Specifications

*Buyer is responsible for configuring finished rifle in accordance with state and local laws

Price: $329.99
16" AR-15 Upper Receiver - 300 AAC Blackout Barrel, 1:8 Twist, Parkerized Finish, SOCOM Profile, 12" Keymod Rail with C-Shaped End Cut 16" AR-15 Upper - 300 Blackout, Parkerized Barrel, 1:8 Twist, 12" C-Cut Keymod Rail

16" SOCOM Profile Barrel, 300 AAC Blackout, 4150 Chrome Moly Vanadium, Parkerized Finish. 12" Lightweight Free Float Keymod Rail with C-Shaped End Cut. These upper receivers are built in-house by expert builders with over 40 years of experience. Each barrel is visually inspected and cleaned prior to assembly. All barrel nuts are torqued to proper specifications per Mil-Spec standards and practices. Every completed receiver is QC inspected and head space checked before shipment. As completed upper receiver assemblies are not considered firearms, no FFL is required. Ships directly to your home.

- MADE IN THE USA
- NO BCG or Charging Handle Included - Select Options to Add
- USA Made Barrel
- Barrel Length: 16"
- Hand Guard: Free Floating 12" Keymod with C-Shaped End Cut
- Full Length Picatinny Top Rail
- Caliber: 300 AAC Blackout
- Barrel Profile: SOCOM Profile
- Barrel Type: 4150 Chrome Moly Vanadium - Parkerized Finish
- Gas System: Carbine Length Gas System, .750" diameter Steel Micro Gas Block
- Upper Receiver: Forged 7075-T6 Flat Top with M4 Feed Ramps
- Forward Assist and Dust Cover Installed
- Muzzle Device: Your Choice A2 Style Birdcage Flash Hider or Compact Muzzle Brake
- Upper Receiver and Hand Guard are Black Hardcoat Anodized Per MIL-A-8625 Type III Class 2 Specifications

*Buyer is responsible for configuring finished rifle in accordance with state and local laws

Price: $329.99
16" AR-15 Upper Receiver - 300 AAC Blackout Barrel, 1:8 Twist, Parkerized Finish, SOCOM Profile, 12" Keymod Rail with V-Shaped End Cut 16" AR-15 Upper - 300 Blackout, Parkerized Barrel, 1:8 Twist, 12" V-Cut Keymod Rail

16" SOCOM Profile Barrel, 300 AAC Blackout, 4150 Chrome Moly Vanadium, Parkerized Finish. 12" Lightweight Free Float Keymod Rail with V-Shaped End Cut. These upper receivers are built in-house by expert builders with over 40 years of experience. Each barrel is visually inspected and cleaned prior to assembly. All barrel nuts are torqued to proper specifications per Mil-Spec standards and practices. Every completed receiver is QC inspected and head space checked before shipment. As completed upper receiver assemblies are not considered firearms, no FFL is required. Ships directly to your home.

- MADE IN THE USA
- NO BCG or Charging Handle Included - Select Options to Add
- USA Made Barrel
- Barrel Length: 16"
- Hand Guard: Free Floating 12" Keymod with V-Shaped End Cut
- Full Length Picatinny Top Rail
- Caliber: 300 AAC Blackout
- Barrel Profile: SOCOM Profile
- Barrel Type: 4150 Chrome Moly Vanadium - Parkerized Finish
- Gas System: Carbine Length Gas System, .750" diameter Steel Micro Gas Block
- Upper Receiver: Forged 7075-T6 Flat Top with M4 Feed Ramps
- Forward Assist and Dust Cover Installed
- Muzzle Device: Your Choice A2 Style Birdcage Flash Hider or Compact Muzzle Brake
- Upper Receiver and Hand Guard are Black Hardcoat Anodized Per MIL-A-8625 Type III Class 2 Specifications

*Buyer is responsible for configuring finished rifle in accordance with state and local laws

Price: $329.99
16" AR-15 Upper Receiver - 300 AAC Blackout Barrel, 1:8 Twist, Parkerized Finish, SOCOM, 15" V-Cut Keymod Rail 16" AR-15 Upper - 300 Blackout, Parkerized Barrel, 1:8 Twist, 15" V-Cut Keymod Rail

16" SOCOM Profile Barrel, .300 AAC Blackout Upper, 4150 Chromoly Vanadium, Parkerized Finish. 15" Keymod Rail with V-Shaped End Cut. These AR-15 300 Blackout upper receivers are built in-house by expert builders with over 40 years of experience. Each barrel is visually inspected and cleaned prior to assembly. All barrel nuts are torqued to proper specifications per Mil-Spec standards and practices. Every completed receiver is QC inspected and head space checked before shipment. As completed 1:8 twist upper receiver assemblies are not considered firearms, no FFL is required. Ships directly to your home.

- MADE IN THE USA
- NO BCG or Charging Handle Included - Select Options Below
- USA Made Barrel
- Barrel Length: 16"
- Hand Guard: Free Floating 15" Keymod with V-Shaped End Cut
- Full Length Picatinny Top Rail
- Caliber: 300 AAC Blackout
- Barrel Profile: SOCOM Profile
- Barrel Type: 4150 Chromoly Vanadium - Parkerized Finish
- Gas System: Carbine Length Gas System, .750" diameter Steel Micro Gas Block
- 1:8 Twist Upper Receiver: Forged 7075-T6 Flat Top with M4 Feed Ramps
- Forward Assist and Dust Cover Installed
- Muzzle Device: Your Choice A2 Style Birdcage Flash Hider or Compact Muzzle Brake
- AR-15 300 Blackout Upper Receiver and Hand Guard are Black Hardcoat Anodized Per MIL-A-8625 Type III Class 2 Specifications

*Buyer is responsible for configuring finished rifle in accordance with state and local laws

Price: $339.99
16" AR-15 Upper Receiver - 1:8 Twist Stainless M4 Contour Barrel, 15" Keymod Rail with V-Shaped End Cut 16" AR-15 Upper - Stainless M4 Contour Barrel, 1:8 Twist, 15" V-Cut Keymod Rail

16" M4 Contour Profile Barrel, Your Choice 5.56MM NATO or.223 Wylde, 416R Stainless Steel. 15" Keymod Rail with V-Shaped End Cut. These stainless steel AR-15 upper receivers are built in-house by expert builders with over 40 years of experience. Each barrel is visually inspected and cleaned prior to assembly. All barrel nuts are torqued to proper specifications per Mil-Spec standards and practices. Every completed receiver is QC inspected and head space checked before shipment. As a complete AR-15 upper assembly is not considered a firearm, no FFL is required. Ships directly to your home.

- MADE IN THE USA
- NO BCG or Charging Handle Included - Select Options to Add
- USA Made Barrel
- Barrel Length: 16"
- Hand Guard: Free Floating 15" Keymod Rail with V-Shaped End Cut
- Full Length Picatinny Top Rail - No T-Markings
- Caliber: Your Choice 5.56MM NATO or.223 Wylde
- Barrel Profile: M4 Contour Profile
- Barrel Type: 416R Stainless Steel
- Gas System: Carbine Length Gas System, .750" diameter Steel Micro Gas Block
- Complete AR-15 Upper Assembly: Forged 7075-T6 Flat Top with M4 Feed Ramps
- Forward Assist and Dust Cover Installed
- Muzzle Device: Your Choice A2 Style Birdcage Flash Hider or Compact Muzzle Brake
- Stainless Steel AR-15 Upper Receiver and Hand Guard are Black Hardcoat Anodized Per MIL-A-8625 Type III Class 2 Specifications

*Buyer is responsible for configuring finished rifle in accordance with state and local laws

Price: $339.99
16" AR-15 Upper Receiver - 1:8 Twist, Stainless Steel  M4 Contour Barrel, 15" C-Cut Keymod Rail 16" AR-15 Upper - Stainless M4 Contour Barrel, 1:8 Twist, 15" C-Cut Keymod Rail

16" M4 Contour Profile Barrel, Your Choice 5.56mm NATO or .223 Wylde, 416R Stainless Steel. 15" Keymod Rail with C-shaped End Cut. These 16-inch AR-15 upper receivers are built in-house by expert builders with over 40 years of experience. Each barrel is visually inspected and cleaned prior to assembly. All barrel nuts are torqued to proper specifications per Mil-Spec standards and practices. Every completed receiver is QC inspected and head space checked before shipment. As completed AR-15 M4 upper receiver assemblies are not considered firearms, no FFL is required. Ships directly to your home.

- MADE IN THE USA
- NO BCG or Charging Handle Included - Select Options to Add
- USA Made Barrel
- Barrel Length: 16"
- Hand Guard: 15" Keymod with C-Shaped End Cut
- Full Length Picatinny Top Rail
- Caliber: Your Choice 5.56mm NATO or .223 Wylde
- Barrel Profile: M4 Contour Profile
- Barrel Type: 416R Stainless Steel
- Gas System: Carbine Length Gas System, .750" diameter Steel Micro Gas Block
- AR-15 M4 Upper Receiver: Forged 7075-T6 Flat Top with M4 Feed Ramps
- Forward Assist and Dust Cover Installed
- Muzzle Device: Your Choice A2 Style Birdcage Flash Hider or Compact Muzzle Brake
- 16-Inch AR-15 Upper Receiver and Hand Guard are Black Hardcoat Anodized Per MIL-A-8625 Type III Class 2 Specifications

*Buyer is responsible for configuring finished rifle in accordance with state and local laws

Price: $339.99
16" AR-15 Upper Receiver - 300 AAC Blackout Barrel, 1:8 Twist, Parkerized Finish, SOCOM, 15" C-Cut Keymod Rail 16" AR-15 Upper - 300 Blackout, Parkerized Barrel, 1:8 Twist, 15" C-Cut Keymod Rail

16" SOCOM Profile Barrel, 300 AAC Blackout, 4150 Chromoly Vanadium, Parkerized Finish. 15" Free Float Keymod Rail with C-Shaped End Cut. This AR-15 upper assembly for sale is built in-house by expert builders with over 40 years of experience. Each barrel is visually inspected and cleaned prior to assembly. All barrel nuts are torqued to proper specifications per Mil-Spec standards and practices. Every completed receiver is QC inspected and head space checked before shipment. As completed upper receiver assemblies are not considered firearms, no FFL is required. Ships directly to your home.

- MADE IN THE USA
- NO BCG or Charging Handle Included - Select Options
- USA Made Barrel
- Barrel Length: 16"
- Hand Guard: Free Floating 15" Keymod with C-Shaped End Cut
- Full Length Picatinny Top Rail
- Caliber: 300 AAC Blackout
- Barrel Profile: SOCOM Profile
- Barrel Type: 4150 Chromoly Vanadium - Parkerized Finish
- Gas System: Carbine Length Gas System, .750" diameter Steel Micro Gas Block
- 16-inch 300 Blackout Complete Upper Receiver: Forged 7075-T6 Flat Top with M4 Feed Ramps
- Forward Assist and Dust Cover Installed
- Muzzle Device: Your Choice A2 Style Birdcage Flash Hider or Compact Muzzle Brake
- Upper Receiver and Hand Guard are Black Hardcoat Anodized Per MIL-A-8625 Type III Class 2 Specifications

*Buyer is responsible for configuring finished rifle in accordance with state and local laws

Price: $339.99