BACKORDER - PLEASE ALLOW UP TO 2 WEEKS FOR SHIPMENT
California Compliant 80% Lower Serial Number Engraving for our DPMS pattern AR-308 80% lower receiver. The size, depth and required information will meet or exceed the firearm marking requirements set forth by the ATF.
Want an engraved AR-308 lower with a personalized serial number that is uniquely your own? Simply provide us with your name, city, state and personalized serial number and we’ll handle the rest for you.
You will receive:
- (1) AR-308 Billet 7075-T6 80% Lower Receiver
- Type III, Class 2 Black Anodized per MIL-A-8625
- Engraved beyond minimum depth of .003"
- Print size in excess of 1/16"
NOTE: Applying a serial number your 80% lower is not required in any state, except for California when AB 857 takes effect on July 1, 2018. Residents outside of California may wish to utilize this service for the event a firearm is lost or stolen. Again, serial number engraving is optional for residents outside California.
For California Residents: On July 1, 2018, California AB 857 will go into effect, requiring homemade firearms to be marked per the ATF's minimum requirements for firearm identification. Failure to mark home-built 80 percent lowers by July 1, 2018 will force those who wish to comply, to apply to the state Department of Justice for a serial number, thereby registering the serial number and firearm. Buy your 80% Lowers Pre-Engraved now, before AB 857 takes effect.
In the form field below, please enter the following information:
NAME: The full (first and last) name of the person who will finish the 80% lower receiver. Initials and abbreviations are not acceptable. Acceptable: John Smith Not Acceptable: J. Smith
CITY: The City or Town where the person completing the firearm currently resides.
STATE: The 2-letter abbreviation of the state where the person completing the firearm currently resides.
SERIAL NUMBER: Enter your personalized serial number. NO SPACES. Alphanumeric characters only - 0-9, A-Z. Maximum of 8 characters. Enter only your desired serial number, every serial number will begin with S/N:. No obscenities, please.
If you wish to purchase multiple engraved 80% lowers, add to your shopping cart 1 at a time, re-entering the required information for each. Each serial number must be unique and cannot match any other home-built firearms serialized under your name! 5D Tactical does not store customer inputted serial numbers!
Notes: The engraving print and spacing may vary depending on the length of your city and/or name. "Cal: Multi" will be applied to all receivers, we are not able to accommodate custom caliber requests at this time. The engraving process is performed after the hard coat anodizing process. Engraved 80% lower orders may not be canceled, returned or exchanged.
*An 80% lower receiver is not considered a firearm and can be shipped directly to your home, no FFL needed. Finish with our AR-308/AR-10 80% Lower Jig.